Wellborn Joinery, design, CNC, build

Kitchen cabinet materials and finishes, explained

What the cupboards are made of, what the doors are faced with, and how to choose a finish for a kitchen, laundry, vanity or outdoor kitchen.

By Wellborn Joinery, cabinet makers in Kilburn, Adelaide. Updated 17 October 2026.

What a cabinet is made of

Most cabinets today are made from board rather than solid timber: particleboard or MDF (a fine, dense fibreboard) with a hard decorative face. Board stays flat and stable, comes in hundreds of colours and woodgrains, and can be cut to the millimetre.

Near water, under sinks, in laundries and in bathrooms, a moisture-resistant board is the usual choice. It copes with damp better than standard board, but no board likes to sit in water, so a leak still needs fixing quickly.

Melamine

Melamine board has a decorative paper fused onto the board under heat and pressure. It is hard-wearing, easy to clean and comes in the widest range of plain colours and woodgrains, which makes it the everyday choice for cupboard bodies, shelves and many doors. Polytec's Melamine range and Acrilam's Decorative Panel range are examples.

Laminate

High-pressure laminate is a thicker, tougher sheet bonded onto the board. It stands up to knocks and heat better than melamine, which is why it is used for benchtops as well as doors, though hot pans still need a heat pad. In the Laminex Colour Collection, the Minerals are made for benchtops. Acrilam's HPL Natural range is a hard-wearing laminate in timber, veneer and metal looks.

Matt, textured and gloss finishes

Beyond everyday melamine, each supplier has special finishes. Polytec's ranges include Woodmatt woodgrains with a soft matt feel, Ravine with a lined woodgrain texture you can feel, Legato and Ultramatt for smooth, deep matt colours, and Ultraglaze for high gloss. Acrilam makes Supermatt and Hi-Gloss acrylic panels, with a smooth acrylic face and a very even colour.

Gloss reflects light and can make a small room feel bigger, but it shows smudges and fingerprints more readily than a matt finish. Textured woodgrains look and feel closest to real timber.

Edges

The visible edges of each panel are covered with an edging strip, usually ABS plastic about 1 or 2 mm thick, matched to the colour of the face. A machine glues it on and trims it flush, which protects the edge of the board and gives the doors a clean, square finish.

Hardware

The hardware decides how the cabinets feel every day: hinges (soft-close or push-to-open), drawer runners (soft-close and full extension), lift-up stays for top cupboards, and handles. The hardware step of the design tool shows each kind moving.

Choosing for each room

  • Kitchens: moisture-resistant board around the sink and dishwasher, and a hard-wearing finish on the doors you touch most.
  • Laundries and bathrooms: moisture-resistant board, and finishes that wipe clean.
  • Covered outdoor kitchens: ask which boards and finishes suit your space; sun, wind and damp all matter.
  • Wardrobes and TV units: everyday melamine works well, so you can spend more on the doors you see.

See any of these colours on a drawn kitchen, laundry, pantry or TV unit in the colour studio, then ask for a real sample: a screen cannot show a colour exactly.

Quick answers

What is the best material for kitchen cabinets?

For most kitchens, moisture-resistant board at least around the sink and dishwasher, with the doors in a melamine, laminate or acrylic finish that suits how you use the kitchen. The right choice depends on the look you want and how hard the kitchen works.

What is the difference between melamine and laminate?

Both put a decorative face on board. Melamine is a paper face fused straight onto the board; high-pressure laminate is a thicker, tougher sheet bonded onto it, which is why laminate is used for benchtops.

Are Polytec, Acrilam and Laminex the same thing?

No. They are three different suppliers of decorative board and panels in Australia, each with its own ranges and colours. You can try colours from all three in our colour studio.

Planning cabinets of your own?

Draw them in our free design tool, or send us your sizes for a written price. Our workshop is at 8/555 Churchill Road, Kilburn SA 5084.

More guides

WhatsApp