Custom bathroom vanities, made in Adelaide
Wall-hung or standing, drawers or doors, one basin or two, made to the width of your bathroom wall and finished in the colour you pick.

Wall-hung or on a kickboard
A wall-hung vanity floats off the floor, which makes a small bathroom look bigger and is easy to clean under. It needs a solid wall, or support inside the wall, to fix to. A vanity on a kickboard stands on the floor and suits any wall.
Drawers or doors
Drawers keep everything in reach and suit most vanities. They are planned around the basin waste and the pipes, so check where yours come out of the wall. Doors give a tall open space below, for bottles and cleaning gear.
Sizes
Measure the wall the vanity goes on, and decide whether it runs wall to wall or stops short to leave room for a towel rail or the shower screen. Most vanities end up between 850 and 900 mm high, and two basins need a wider wall. The usual heights and depths are in our vanity sizes guide.
Finishes for a wet room
Bathrooms are wet and steamy, so ask us about the moisture-resistant board options in the Polytec, Acrilam and Laminex ranges. Woodgrains, matt colours and gloss all suit a bathroom; pick one that wipes clean.
Planning it
In the design tool, choose "Some rooms" and tick Bathroom vanity. Add drawers, doors and the basin, set the width of your wall, and send us the drawing with the basin and tapware you have chosen.
Draw your own
This drawing comes from our design tool. Open it, set the width of your wall, add drawers or doors, and send the drawing to us for a price.
Design it yourselfQuestions people ask
What height should a bathroom vanity be?
Commonly 850 to 900 mm from the floor to the top. If the basin sits on top of the vanity rather than in it, the vanity is usually made a little lower, so the rim of the basin ends up at a comfortable height.
Do I need to choose the basin and taps first?
It helps. The top and the drawers are planned around the basin, its waste and the tapware, so send us the models before the drawing is finalised.
Can you make vanities for a business?
Yes. We make runs of washroom vanities for staff and public washrooms. See commercial cabinets.
Can a vanity be made as a flat pack?
Yes, like any of our cabinets. See flat packs.
Help with planning
Standard kitchen cabinet sizes
Bench height, cabinet depths, top cupboards, tall pantries, islands, vanities, laundries and wardrobes, in millimetres.
Read the guideCabinet materials and finishes
Moisture-resistant board, melamine, laminate, acrylic, matt and gloss, edging and hardware, explained simply.
Read the guideFlat pack or custom-made cabinets
Ready-made flat packs, made-to-measure flat packs or cabinets built in a workshop: fit, finish, time and cost.
Read the guide
Talk to us about your bathroom vanities
Our workshop is at 8/555 Churchill Road, Kilburn SA 5084. Open Monday to Saturday, 9am to 5pm.
