Wellborn Joinery, design, CNC, build

Standard kitchen cabinet sizes in Australia

The sizes most Australian kitchens are built around, in millimetres, and the sizes our design program starts with. Every room is different, so treat these as a starting point rather than a rule.

By Wellborn Joinery, cabinet makers in Kilburn, Adelaide. Updated 17 October 2026.

Kitchen cabinet sizes at a glance

PartCommon sizeOur design program starts with
Bench height, floor to top of benchtop850 to 950 mm, most often 900 to 920 mm900 mm
Kickboard under the cupboards100 to 150 mm150 mm
Base cupboard body heightAbout 720 mm720 mm
Benchtop thicknessAbout 20 to 40 mm, depending on the material30 mm
Base cupboard depthAbout 560 to 600 mm580 mm
Benchtop depth600 to 650 mm600 mm
Gap from benchtop to top cupboardsAbout 550 to 700 mm600 mm
Top cupboard height600 to 900 mm, often 720 mm720 mm
Top cupboard depth300 to 350 mm330 mm
Tall pantry and oven cupboardsAbout 2200 to 2400 mm high, about 600 mm deep2220 mm high, 600 mm deep

The last column is where the design tool starts. You can change the bench height, the kickboard and the benchtop thickness there, and the cupboards adjust around them. Every custom kitchen is then made to the sizes of its own room.

Bench height

A bench at about 900 mm suits most people. Taller households often go up to 950 mm. A simple test: stand at a bench with your arms by your sides and bend your elbows. A bench about 100 to 150 mm below your elbows is comfortable for chopping.

Top cupboards

Top cupboards usually leave about 600 mm between the benchtop and the bottom of the cupboard, so there is room to work and space for appliances. Over a gas cooktop in a new kitchen, the Australian gas standard (AS/NZS 5601.1:2022) asks for at least 650 mm from the top of the trivets to the rangehood, and more if the cooktop or rangehood maker says so. That is why the rangehood over a gas cooktop usually sits higher than the top cupboards beside it. Always follow the installation instructions for both.

Top cupboards are shallower than the base cupboards, usually 300 to 350 mm deep, so you do not hit your head when you lean over the bench.

Cupboard widths

Ready-made cabinets come in a set of stock widths, such as 300, 400, 450, 600 and 900 mm, and any gap left at the end of a run is closed with a filler. Made-to-measure cabinets can be any width, so a run can finish neatly at the wall without wide fillers.

A cupboard wider than about 600 mm usually has a pair of doors. Drawers are commonly 450 to 900 mm wide.

Spaces for appliances

In Australia most dishwashers and built-in ovens are made for a 600 mm wide space, and cooktops commonly come 600 or 900 mm wide. Fridges vary the most: measure the fridge you will use and add the air gaps its maker asks for at the sides, top and back. The fridge space is the one size worth checking twice.

Islands

An island bench is commonly 900 to 1200 mm deep, and the benchtop overhangs the cupboards by about 300 mm where stools go; the design tool adds that overhang when you choose seating. For the space to leave around an island, see kitchen layouts.

Bathroom vanities

A vanity commonly stands 850 to 900 mm high to its top, or a little lower when the basin sits on top of it. Depths of 450 to 500 mm are usual, with shallower ones for small bathrooms, and two basins side by side need about 1500 mm of width or more. See custom bathroom vanities.

Laundries

Most front-loading washers and dryers are about 600 mm wide and about 850 mm high, and some are taller or deeper. A bench over them has to clear the machine with a gap above it and room for the hoses and taps behind, so it often ends up a little higher than a kitchen bench. Check the height and depth of your own machines before the bench height is set. See laundry cabinets.

Wardrobes

Built-in wardrobes are usually about 600 mm deep inside, so a coat hanger fits across the rail without touching the doors. A long-hanging section for dresses and coats needs about 1500 mm of clear height or more; double hanging, with one rail above the other, needs about 900 to 1000 mm under each rail. See built-in and walk-in wardrobes.

Quick answers

What is the standard depth of kitchen cabinets?

Base cupboards are usually about 560 to 600 mm deep, under a benchtop 600 to 650 mm deep. Top cupboards are usually 300 to 350 mm deep, and tall pantry cupboards about 600 mm.

What is the standard height of a kitchen bench in Australia?

Most kitchen benches are about 900 to 920 mm from the floor to the top of the benchtop, with 850 to 950 mm used to suit shorter or taller people.

How high should top cupboards be above the bench?

About 600 mm from the benchtop to the bottom of the top cupboards is common. Over a gas cooktop, the rangehood goes higher: at least 650 mm above the trivets in a new kitchen, or more if the cooktop or rangehood maker says so.

Planning cabinets of your own?

Draw them in our free design tool, or send us your sizes for a written price. Our workshop is at 8/555 Churchill Road, Kilburn SA 5084.

More guides

WhatsApp